
New 20Ft Tank container сhassis
-
Gr.TC-S3-20
Reaching higher efficiency standards in chemical goods
transportation as per ADR protocolRUB 3 300 000 and upward, incl. VAT
Axle unitGreat selection: At customer's request, the semitrailer axle unit may be made up from axles produced by either Jost, SAF or BPW.) ADRThe standard configuration comes complete with equipment for transporting dangerous goods in accordance with ADR (European Agreement on the International Carriage of Dangerous Goods, as amended on 01.01.2019.) FrameLightweight and durable: The high-tensile steel frame successfully withstands the loads typical for transporting high density liquids. TubesSpecial purpose equipment: The semitrailer comes complete with equipment necessary for efficient liquid bulk cargo handling - a drain tap, a drain chute, tubes for storing hoses -
Safety at the forefront
of every hauling route - ADR-equipment in standard configuration
-
Wide functional
potential - Two container arrangement schemes
-
Maneuverable and
easy to handle - for intensive transport operation
-
Safety at the forefront
-
Gr.C-L3-40
Lightweight and modern durable vehicle
for hauling 40Ft and 40Ft HC containersPrice on request
Wabco Opti LinkControl the loads: The pre-installed OptiLink monitoring service allows to control distribution of weight loads and other key parameters with the use a standard smart phone. Axle systemVariability of axle selection: The semitrailer can be equipped with the Jost light process axles or with the long appreciated SAF Intradisk Custom Design axles. FrameBetter strength, smaller weight: The semitrailer frame is made of high strength S700 МС construction steel. - A tool for profitable transportation
- For the most spacious 40 Ft HC containers
-
Light and at
the same time strong - Maximum useful load
-
High operation
readiness - Intensive operation at any distance
-
Gr.C-L3-45
Keep up the pace and do more work
with 40 and 45 Ft NS containers in less timePrice on request
Wabco OptilinkReal-time monitoring: Monitor the current axle loads using the pre-installed OptiLink system Axial unitSelect your own axle: The semi-trailer can be equipped with either light high-tech JOST axles or proven SAF Intradisk Custom Design axles FrameHigher durability, lower weight: The semitrailer frame is made of high-tensile S700 MC steel. Its design was developed employing the most advanced engineering solutions -
The key
to profitable operations -
Haul larger
capacity containers -
Lightweight
and sturdy -
Ready for
great workloads -
Advanced
engineering -
The best components
and materials
-
The key
-
Gr.C-L3
Rendition of versatility
Designed for the most common shipping containers typesRUB 3 650 000 and upward, incl. VAT
Side protectionSafety and convenience: Aluminum profile side protection can be lifted and locked for easy access to spare wheel basket. FrameLasting durability: Design features of the gooseneck offer better resistance to intense dynamic loads. Axle systemAny load and distance: The container chassis may be fitted with BPW or SAF axles depending on the selected configuration. PlatformVersatility at the core: The semi-trailer comes complete with a removable steel platform for a forklift. -
Ample
opportunities - Work with major container types
-
Reliable means
of delivery - Great technical availability
-
High
profitability - MLower costs, higher profits
-
Ample
-
Gr.C-L4
The best choice for heavy container hauling
RUB 4 050 000 and upward, incl. VAT
Axle systemA solution for all distances: The reinforced SAF Intra Disk axle system is the most balanced solution for intermodal transportation. FrameLight and strong: The semitrailer frame with narrow transition to the gooseneck is designed to withstand dynamic loads and retain rigidity. PlatformRemovable work platform: Allows to unload a 20 ft container without removing it from the semitrailer by using a lift truck. FittingsHigh versatility: Six pairs of fitting locks for reliable fastening of containers of all major sizes. - Original layout
- Maximum legal carrying capacity
- Pinnacle of transporting capacity
- For all the marketable container types
- Base for profitability strategy
- Cost reduction and profit growth
-
Gr.TC-S4-20
Heavy tank container transportation
in line with weight control standardsRUB 3 850 000 and upward, incl. VAT
Axial unitUnrestrained from conditions: SAF INTRADISK axle unit with disc brakes will ensure timely cargo delivery, no matter the route, distance, or load capacity ADRThe semitrailer is equipped for transporting dangerous goods in accordance with ADR (European Agreement on the International Carriage of Dangerous Goods, as amended on 01.01.2019) FrameRobust frame: Ensuring safe operation with tank containers carrying high bulk density liquids TubesEquipment for tank containers: The standard configuration of the model is equipped a work platform fitted with a drain chute, as well as drain valve and tubing for storing hoses -
High safety
standards - ADR equipment in standard configuration
-
A model of high
profitability - Improved transportation cost-effectiveness
-
Increased
uptime - Ready to handle heavy loads
-
High safety
- Geometric volume
- Hitch height
- 1 150 mm
- Permissible total weight
- 38 000 kg
- Hitch load
- 11 000 kg
- Overall length
- 7 600 mm
- Overall width
- 2 500 mm
- Overall height
- Rated load capacity
- 34 600 kg
- Curb weight
- от 3 400 kg
- Axle system load
- 27 000 kg
- Body height at front wall
- Inner body width
- Maximum tipping angle
- Tires
- 385/65 R22.5
- Vehicle category
- 04 standard
- Types of containers
- 1x20 Ft Tank, 1x20 Ft, 1x20 Ft SWAP
- Number of fittings
- 4
With the new Gr.TC-S3-20 tank container chassis at your disposal, you are free to choose any route knowing confidently that you will be able to deliver the cargo on time. The cargo may vary from industrial acids and disinfectants to food products.
Designed for fast and secure delivery of liquid cargo, the Gr.TC-S3-20 semitrailer has a lightweight and robust design that ensures smooth operation even in tough driving conditions. The minimum curb weight is 3400 kg and may vary depending on the configuration. In standard configuration, the semi-trailer is fitted with equipment as per ADR protocol and, in addition to tank containers, is capable to operate with SWOP containers and standard 20Ft containers. Any transport task will be well within your range.
Design advantages
The Gr.TC-S3-20 model was based on a new frame - an advanced development of the Grunwald design bureau. The entire frame is made of high tensile Strenx S700 steel, and the configuration of fitting locks in the frame supports two container placement schemes.The first scheme, in which the container is located closer to the tractor cab, is best suited for the transportation of heavy containers. In this position, the payload of the long-haul vehicle is higher due to its optimal distribution between the tractor and the semitrailer. The second placement scheme has the container situated in the rear overhang of the semitrailer for situations when the container should be unloaded with a forklift.
This layout scheme provides for a wide range of applications and allows operators to standardize their fleet with a single container chassis model.
Additionally, the Gr.TC-S3-20 model is equipped with a new reinforced underride protection guard, which ensures improved passive safety in accordance with the European directive ECE-R58.03. The rear working platform is made of composite metal decking and is designed for forklift operations. The semitrailer is fitted with special equipment – plastic tubes for storing drain hoses, drain tap and a stainless-steel chute.



At the request of the customer, the semitrailer configuration may include additional options:
-
SAF IntraDrum Custom design axles with drum brakes;
-
BPW AL Heavy Duty Axles with Drum Brakes;
-
Rear lift axle;
-
Custom color scheme.
The semitrailer structure warranty period is 12 months from the date of initial registration, but no more than 24 months from the date of manufacture as recorded in the Manufacturer’s Certificate of Origin.
Warranty and service obligations shall be fulfilled by a specialized Grunwald service center in Moscow (Sheremetyevo), as well as a network of authorized service stations.
Certification
Grunwald semi-trailers are certified in accordance with the latest certification regulations of the Federal Technical Regulation and Metrology Agency of the Russian Federation (Rosstandart) and conform to the requirements of the Technical Regulations of the Eurasian Economic Union (EAEU).

Fill out the order form and our managers will definitely contact you:
Send requestUse our financial instruments and get an interest-free loan:
LeasingUse the Trade-in program on favorable terms:
Trade-in