
Daewoo tipper trucks with Grunwald superstructure
-
Half-pipe body
Semi-circular body structure helps to accelerate bulk cargo unloading. This type of a tipper body offers greater resistance to bents and deformations. Non-box bodybuilding is considered to be a prospective development of construction transportation. Variability depending on tasksThe design of the tipper superstructure was thought out to allow for production of bodies that combine various high-tensile and wear-resistant steels depending on appropriate transport task. The thickness is determined by a specific material and may vary from 5 to 6 mm in wall sides, and from 6 to 8 mm in the base of the body. Efficient unloadingAutomatic tailgate locking mechanism ensures maximum unloading precision. The rear wall opens at two degrees of body lift. - Grunwald bodies for Daewoo vehicles used in construction
-
High production effectiveness
The body sides are made as a seamless bent part. This solution improves structural strength and rigidity for operations under high loads. “Hardox In My Body” symbolsThe certification labels indicate that the tipper body is made of wear-resistant and shockproof Hardox 450 steel and has unparalleled resistance to abrasion. Efficient body heating systemThe exhaust gas heating system prevents freeze-up and sticking of loose cargoes. A simple mechanism for system attachment/detachment via a valve located under the cabin. - Grunwald bodies for RENAULT vehicles used in construction
-
Half-Pipe body
Half-pipe profile of the body allows faster unloading of inert cargoes. Due to molded side walls, the half-pipe body is more resistant to deformation and dents. The future of construction transportation will be mainly determined by development of non-solid bodies. Advanced materialsThe body is made of wear-resistant and shockproof Hardox 450 steel. The exceptional physical properties of the material significantly increase the body service life and maintain marketable appearance over a long period. Efficient unloadingThe automatic locking mechanism on the rear side ensures maximum precision of unloading. The rear side is opened even at two degrees of body tipping - Grunwald bodies for FORD vehicles used in construction
-
High production effectiveness of the structure
The body sides are made as seamless bent parts. The total number of welds in the body – potential places of stress points and corrosion pits – is reduced. Strength and rigidity are improved for operations under high loads “Hardox In My Body” certified bodyThe project of Gr.M22-SB-SS superstructure is based on use of the advanced materials such as wear-resistant and shockproof Hardox450 steel in the body structure. Use of original material with exceptional strength, hardness and impact viscosity is confirmed by the “Hardox In My Body” certification symbols on the body sides Delivery chuteA removable delivery chute ensures successful operation with asphalt pavers. Inert cargoes are unloaded with better precision - Grunwald bodies for MAN vehicles used in construction
-
Flawless physical parameters
Among the current offers on the market, the Grunwald superstructure showcases the largest internal body width (2,450 mm), the lowest-set center of gravity, and the lowest loading height (2,950 mm). Wear-resistant bodyTipper body made from Hardox 450 steel possesses high abrasion resistance as well as high impact resistance. The superstructure is certified in accordance with the “Hardox in My Body” program. Precise unloadingThe automatic locking mechanism on the rear side ensures maximum precision of unloading. The rear side is opened even at two degrees of body tipping. Efficient body heating systemThe exhaust gas heating system prevents freeze-up and sticking of loose cargoes. A simple mechanism for system attachment/detachment via a valve located under the cabin. - Grunwald bodies for VOLVO vehicles used in construction
-
Internal width and center of gravity
Among the current offers on the market, the Gr.S22-SB-SS superstructure showcases the largest internal body width equal to 2,450 mm and the lowest-set center of gravity. Hardox450 steel bodyThis is a wear-resistant and shockproof steel capable of increasing the body service life and preventing premature wear caused by abrasive materials. The steel is supplied directly from Sweden. Origin of the material is confirmed by the “Hardox In My Body” certificate Increased strengthThe body sides are made as seamless bent parts. This way, the number of welds in the body – potential places of stress points and corrosion pits – is reduced and the structure rigidity is improved for operations under high loads Extended capabilitiesFor the base of 1,990 + 2,960 + 1,450 mm, the internal dimensions of the Gr.S22-SB-SS superstructure allow transportation of concrete road slabs up to 6 m in length - Grunwald bodies for SCANIA vehicles used in construction
-
Automatic locking mechanism of the rear side
Ensures maximum unloading precision. The rear side is opened even at two degrees of body tipping. Internal width and low-set center of gravityThe Box-type superstructure design created by Grunwald engineers has an advantage over our competitors, as our design boasts the largest internal body width of 2450 mm and a lower centre of gravity. Hardox450 steel bodyThis is a wear-resistant and shockproof steel capable of increasing the body service life and maintaining marketable appearance over a long period. - IVECO tipper trucks
- Grunwald bodies for IVECO vehicles used in construction
- Geometric volume
- ≈ 22
- Curb weight
- 48 - 50º
- Tires
- 43 000 kg
- Loading height
- 3 100 mm
- Model name
- Gr.D22-SH-II
- Base chassis
- Daewoo CR8M7-NOVUS
- Body internal dimensions, mm (length x width x height)
- 6 590 x 2 450 x 1 665 mm
- Transported cargo weight, kg
- 27 050 kg
- Subframe material
- S500 MC construction steel
- Body
- half-pipe
- Body material
- wear-resistant steel
- Lateral side thickness
- 5/6 mm
- Body base thickness
- 6/8 mm
- Hydrofication
- Binotto / HYVA
Grunwald presents the Daewoo Novus tipper truck with the Grunwald tipper superstructure. The vehicle is capable to tackle any challenges in construction and redevelopment work with confidence. This Korean “dragon” is a genuine trusty worker!
The Gr.D22-SH-II tipper superstructure is the paragon of further development of Grunwald bodybuilding program for the Russian market. This product has the potential to challenge the stereotypes that have long been established in Russia regarding the optimal body shape for a tipper truck.
- Ladder in the front part of the body with a mating structure for steps;
- Spare wheel bracket on the body front wall;
- Removable protection screen made of steel;
- Body heating by means of exhaust gases;
- The body heating parts, including the three-way valve, are made of AISI 304 stainless steel;
- 200 and 250 bar hydraulic cylinders manufactured by HYVA or Binotto concern;
- A high capacity hydraulic pump.



- Additional hydraulic line equipment for work with trailers. Trailer body lifting hydraulic line, with features such as quick disconnect coupling and control from the cab;
- Lifting underride protection bar. Enables work with asphalt paver, while providing the maximum exit angle.
The semitrailer structure warranty period is 12 months from the date of initial registration, but not more than 24 months from the date of production.
Warranty and service obligations shall be fulfilled by a specialized Grunwald service center in Moscow (Sheremetyevo), as well as a network of authorized service stations.

Fill out the order form and our managers will definitely contact you:
Send requestUse our financial instruments and get an interest-free loan:
LeasingUse the Trade-in program on favorable terms:
Trade-in